Advertisement
Users and Installation Manual: Flood Sensor AQS-LoRa (FLOLWE02)
Flood Sensor AQS-LoRa
SKU: FLOLWE02
Version: 1.0.0
Product Description
The Flood Sensor detects the presence of water on its sensor pins and sends an alarm message
wirelessly when triggered. In addition, the device will regularly report the ambient temperature and
humidity and send an alarm when the readings exceed thresholds that can be set for both humidity and
temperature. The device itself is designed to sit on the floor, where 3 brass telescopic pins can detect
water on both hard floors (tiles) and soft carpets. The unit comes with a mounting bracket. It can be
screwed or taped to the wall or floor. When the main sensor is in the bracket, a super-flat sensor pad
connected by wire to the bracket is used to detect water.
When an alarm is active, the unit emits a sound and a red LED flash. The unit is powered by an internal
CR123 battery that lasts approximately 10 years in normal operation.
The device can be directly connected to an Aqua-Scope leak monitor and sends its information directly to
the Aqua-Scope system.
Connecting to Aqua-Scope Monitor
The sensor can be connected directly to an Aqua-Scope monitor without any further setup. Please scan
the QR code with your Aqua-Scope App to connect the device to your Aqua-Scope monitor.
Installation and Functions
The first step is to insert the CR123 battery. Turn the top of the sensor housing counterclockwise to open
the housing. Inside you will see the functional components of the unit:
1. CR123 battery holder. Be sure to insert the battery with the correct polarity. Inserting the battery
the wrong way will not damage the electronics, but will drain the battery without any function.
2. Button
3. Dual Color LED
4. Buzzer Sound
Copyright © 2023 Aqua-Scope Technologies, Sakala tn 7-2, 10141 Tallinn, Estonia, www.aqua- scope.com
Advertisement
Table of Contents
Related Manuals for Aqua-Scope FLOLWE02
Summary of Contents for Aqua-Scope FLOLWE02
- Page 1 When an alarm is active, the unit emits a sound and a red LED flash. The unit is powered by an internal CR123 battery that lasts approximately 10 years in normal operation. The device can be directly connected to an Aqua-Scope leak monitor and sends its information directly to the Aqua-Scope system.
- Page 2 After inserting the battery (resp. removing the isolating slip), the device is ready for operation. You can check the function by hitting the button. You will hear a beep, the LED goes on and a status packet is sent towards the Aqua-Scope Monitors. The unit constantly checks for flooding and reports a heartbeat every 15 minutes.
- Page 3 The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from Aqua-Scope. We reserve the right to make any alterations that arise as the result of technical development.
- Page 4 Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.aqua-scope.com/ce Español Por la presente, Aqua-Scope Technology OÜ declara que el tipo de equipo radioeléctrico FLOLWE02 es conforme con la Directiva 2014/53/UE. El texto completo de la declaracin UE de conformidad está disponible en la direccin Internet siguiente: www.aqua-scope.com/ce...
- Page 5 Português O(a) abaixo assinado(a) Aqua-Scope Technology OÜ declara que o presente tipo de equipamento de rádio FLOLWE02 está em conformidade com a Diretiva 2014/53/UE. O texto integral da declarao de conformidade está disponível no seguinte endereo de Internet: www.aqua-scope.com/ce Română...
Need help?
Do you have a question about the FLOLWE02 and is the answer not in the manual?
Questions and answers