Schertler M AG6 Quick Start

Q U I C K G U I D E
Schertler SA Scan the QR code
Via Beroldingen 18
6850 Mendrisio the USER GUIDE
Switzerland
T +41 (0)91 630 07 10
F +41 (0)91 630 07 11
info@schertler.swiss
www.schertler.swiss
Facebook @schertler.sa
Instagram @schertleraudio
Youtube @Schertler SA
#shareyourschertler
QUICK START

INSTALLATION

1. Position the MAGNETICO AG6 inside the
soundhole and push it as close to the end of the
fingerboard as possible. Make sure that the pickup
is perpendicular to the strings.
2. Turn both wheels counter-clockwise to fix the
pickup to the soundboard. Take care not to
overtighten the clamps or you may damage the
guitar's finishing.
The distance between the strings and the AG6
to open
THANK YOU
FOR
CHOOSING
SCHERTLER
should be around 5mm (4mm is ideal). If the action
is higher you can raise the pickup placing a
thickness between the AG6 and the soundboard
before tighten the wheels.
3. Connect the 1/8" jack cable to the output.

CONNECTION

Now you can plug in your mono jack and discover
the pickup's amazing sound.
USER GUIDE available at www.schertler.com
RELATED PRODUCTS
DYN AG6
contact transducer
CA M EXT
External jack cable
ACOUSTIC
Amps
S MIC
condenser microphone
YELLOW
Preamps
ARTHUR
Mixer