Page 1
QUICK START INSTALLATION should be around 5mm (4mm is ideal). If the action 1. Position the MAGNETICO AG6 inside the is higher you can raise the pickup placing a soundhole and push it as close to the end of the thickness between the AG6 and the soundboard ngerboard as possible.
Page 2
DYN AG6 RECOMMENDED POSITIONING and WARNINGS Ideal position for percussion style Contact surface Glue must be placed on this side. WARNING! Fix DYN AG6 by only applying glue on the inside of the guitar. Any glue used on external surfaces can damage the guitar’s varnish.
Page 3
Do NOT use MAGNETICO AG6 with STAT PRE preamp nor activate the 10V on preamps, amps and mixers as it will damage the pickup. Plug and unplug the 1/8” jack connectors with caution, and only if necessary. These must be perfectly perpendicular when plugging/...
Page 4
RELATED PRODUCTS DYN AG6 S MIC contact transducer condenser microphone CA M EXT YELLOW External jack cable Preamps ACOUSTIC ARTHUR Amps Mixer...
Need help?
Do you have a question about the MAGNETICO AG6 and is the answer not in the manual?
Questions and answers