Advertisement
Section 1 - Mounting Considerations / Required
Adaptor Kits
Depending on the model of bike or what is
already installed in the bike, a KENWOOD
amplifier adaptor kit may be required.
If you have a Standard, EG Classic, Street Glide or Ultra and this is the only
KENWOOD amplifier in the system, the amplifier will adhere to the top of the radio
using the supplied "hook and loop" adhesive and no adaptor is needed. If you prefer to not
have the amplifier sitting on top of the radio, you can also use the KENWOOD CA-PLT98
mounting plate kit. This kit bolts into your fairing and locates the XM160-2-98 between
the radio and the brake side speaker.
If you have a Standard, EG Classic, Street Glide, or Ultra and this will be the 2nd
amplifier in the system, the KENWOOD CA-PLT98 mounting plate kit is required.
--------------------------------------------------------------------------------------------------------------
If you have a Road Glide or Road Glide Ultra, KENWOOD has 2 different RG adaptor
kits available:
1) If this is the only amplifier in the system, you will need the KENWOOD CA-PLT98RG
mounting plate kit, which bolts the amplifier to the main studs that attach the inner
fairing to the frame of your bike.
2) If there is already a KENWOOD XM160-2-98 in the bike, it should be mounted to a
plate attached to the main studs that hold the inner fairing to the frame of the bike. The
second amplifier will bolt in using the KENWOOD CA-PLT98RG2 mounting plate kit. This
will locate the second amplifier off to the extreme brake-side of the inner fairing.
If you do not have the required adaptor, please consult your authorized KENWOOD dealer.
3
Advertisement
