Seitz Roundshot D2x Instruction Manual page 61

3.2.9 Manage: Settings (continued)
Place the flash file on your computer. Make sure that the camera is connected and
the battery is fully charged before flashing the camera..
Press it to flash the camera.
This process takes approximately 1 to 2 minutes. Stand by and do not touch the
camera or computer.
When the flash camera process has been completed successfully a confirmation
pop-up window appears.
Confirm by pressing the
When the two processes are finished and the data (in kB) in the two windows match, the
camera RAM is fully operational. The left window will display the message
the right window the RAM capacity of the camera are displayed.
In case the two data sets (in kB) do not match, the camera RAM is damaged and an error
message (
for repair.
Confirm by pressing the
occurs continuously (for example, no data transfer is possible between
digital scan back and computer).
Instruction Manual Roundshot D2x
button.
Select
digital scan back.
As a first step the software will fill data in the
camera RAM. This write process will be
displayed in the window on the left.
Then the software will download data from
the camera RAM. This read process will be
displayed in the window on the right.
) will appear. Please send the digital scan back to the factory
button.
- version 3.2 February 2010 - © by Seitz Phototechnik AG / Switzerland
and in
www.roundshot.ch page 60