Seitz Roundshot D2x Instruction Manual page 109

5.4 HDR workflow
5.4.2 Image capture
Either take an image with medium exposure and optimise the histogram or create a
fast exposure and reduce the light source (sun) to the minimum. This will determine
the base for bracketing.
Step 2: Set the white balance
There are three possible options for white balance:
•
•
using temperature & tint (manual)
•
(direct sunlight, shade, tungsten, fluorescent)
The above white balance options will keep the temperature & tint values exactly the
There is always the possibility to readjust the white balance afterwards. However,
the fastest and most accurate workflow is to have a uniform white balance from the
beginning.
temperatures and hues for every image. As a consequence, the HDR
mixing will lead to artefacts.
Instruction Manual Roundshot D2x
for point white balance
- version 3.2 February 2010 -
Step 1: Take a test image to
determine exposure
Example:
Exp1=1/250s
Exp2=1/63s
Exp3=1/16s
© by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 108