Table of Contents
Advertisement
6.2 Possible error messages
In this section we have summarised possible errors of the Roundshot D2x camera
system. In case the error cannot be solved please contact your distributor or a Seitz
Roundshot technician in Switzerland.
6.2.1 Exposure and data transfer errors
These errors occur when the exposure (capture time) is not ideal or when the data
cannot be transferred between camera and computer (RAM).
Timeout
error
Not enough
light
Too much
light
Not enough
memory
DNG image
> 65,000
pixels
JPEG image
> 65,500
pixels
Instruction Manual Roundshot D2x
Root cause
The image capture
exceeds 3 minutes
focusing: Maximum read-out speed
reached; sensor cannot process data
focusing: Minimum read-out speed
reached; sensor cannot process data
Roundshot software does not
receive enough RAM to process the
image; the image is too large
The raw (dng) image cannot be
opened by raw converters if it has
more than 65,000 horizontal pixels
The jpeg image cannot go beyond
65,500 pixels in width
- version 3.2 February 2010 -
Solution
Increase capture speed by
changing aperture, exposure
time, or ISO/ASA
Increase capture time by changing
aperture, exposure time or ISO/ASA
Decrease capture time by changing
aperture, exposure time or ISO/ASA
Decrease RAM requirements by
using a shorter focal length,
decreasing the image angle or by
using a lower resolution (binning)
Convert the dng file in the Seitz
Roundshot software or save the
image as tiff or jpg
Save the image as tiff
© by Seitz Phototechnik AG / Switzerland
www.roundshot.ch
page 114
Advertisement
Table of Contents
