Calling A Remote Phone - Sony IT-A300: Operating Instructions Manual

a cc te re a A 2
a nL a
s
Each time a new message is left
on the phone, the phone will call
your pager only once.
@ When a call comes in ———_____________—_
The caller hears the outgoing message stored in OGM1.
if the caller leaves a message
The phone dials the phone number stored in speed dialing number 00
to ring your pager. When notified, call your phone to "pick up" the new
message.
For details, sae the "Calling from a remote phone" (page 42) section.
Or] Tate M-Mccaire) (om alelars
e
Each time a new message is left
on the phone, the phone wil! call
the remote phone only once.
@ Preparation ———______________—_—____
¢ Prepare a short transfer message (less than 30 seconds) (page
28).
* Store the phone number to access the remote phone to speed
dialing number 00 (page 24).
* Set a security code. (page 32)
« Set the answer mode to TRANSFER (page 29).
See page 44 and select one of more message boxes to use, then
press SET/REC to turn on the answering function.
@ When a call comes In
The caller hears the outgoing message stored in OGM1.
If the caller leaves a message
The phone dials the phone number stored in speed dialing number 00
to ring the remote phone.
If you answer this call, you hear a transfer message that you recorded.
Enter a security code to "pick up" the new message. For details, see
the "Calling from a remote phone" (page 42) section.
Remote control functions | 45
moe = em eT reer ee etter areee re erreny peeene ven agree