Matrix Tippkemper GARDIX ISD-10-B-GD-S162 Manual

GARDIX fail-safe inductive sensor ISD-10-B-GD-S162/293(-GD)
Safety device according to the machine directive 2006/42/EC, short form data sheet
When installing and operating the sensor, it is necessary to take into consideration the complete operating manual.
1258
0340
ATEX designation:
II 2G Ex db IIC T5 Gb
II 2D Ex tb IIIC T100°C Db IP67

Technical Data

Type
Performance Level (PL), EN 13849-1
Safety category, EN 13849-1
Safety integrity level, EN 62061
Safety-related reliability PFHd [1/h]
MTTFd [Years]
DC/CCF/Cat.
Type of Ex protection Gas,
directive 2014/34/EU
Type of Ex protection Dust,
directive 2014/34/EU
Only for use in Ex zones
Installation method
Rated operating distance sn,
Enable zone
Hysteresis
Safe switching off distance s(ar)
Repeatability
Utilzation category
Supply voltage Ue
Absolute maximum supply voltage Um
Rated insulation voltage
Current consumption
Maximum power dissipation
Response time to safety request
Power up delay time
OSSD
Output voltage at 24 V
Voltage drop
Current rating
Short-circuit protection
Display
Housing, type ISD-10B-GD-S162
Housing, type ISD-10B-GD-S293
Enclosure rating, according to EN 60529
Ambient working temperature range T
Storage temperature range
EMC, shock and vibration resistance
Connection cable, type ISD-10-B-GD-S162
Connection cable, type ISD-10-B-GD-S293
Cable, minimum bending radius
Accessories
Options
Function and
LED indication
Output with dynamic test function
Object detected, Outputs switched ON
+ VDC
0V 20ms
Outputs inactive
200us (Test pulse)
no object detected
Installation:
Lateral protection plates must not rise above the sensor.
Sensors for non flush mounting arrangement have the highest operating distance, but a
part of the parasitic lateral electromagnetic field can disturb the safe function. Lateral
protection plates or other metallic objects must not influence the Sensor. For safe function
a lateral free space around the sensor must be guaranteed. The series IS*-10-B(-GD),
sensors for flush (embeddable) mounting, no lateral free space is required (A=0). It's
possible to realize a better mechanical protection and they have a higher immunity against
spurious releasing. In a not embedded mounting arrangement the sensors reach a lower level
of operating distance (sa) then sensors for not embeddable mounting.
ATEX/IECEx RELATED MARKINGS
(X designation of the certification number: The plastic parts of the body must be protected against UV-radiation und direct sunshine)
IECEx BVS 14.0108X
IECEx designation:
Ex db IIC T5 Gb
Ex tb IIIC T100°C Db IP67
Type
SRP/CS - SREC, fail-safe inductive sensor PDDB, I1A30AP1
10mm, (on steel 37, (sn x 3)
>=3mm ... <=8mm, (on steel 37, (30mm x 30mm x 1mm)
24VDC +-10% (Power supply type PELV according to EN 60204, item 6.4.2)
M30, brass, nickel plated / Sensing area: Synthetic, PEEK mod.
M30, stainless steel 316ss / Sensing area: Synthetic, PEEK mod.
amb
4+PE x 0,5mm
4 x 0,22mm 2 , shielded, FEP/silicone rubber, leads color-marked, dia. 4,4mm, length: 6m
- 2x nuts M30. (Optional 1x clamp)
- Other cable lengths on request
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
Object detected, LED green
2 x PNP-Outputs, Transistors conducted.
CE 1258
Type ISD: II 2G Ex db IIC T5 Gb,
Type ISD: EC-type examination certification
Type ISD: IECEx certification
T : -10°C < T < +50°C
amb amb
Date of production: Numerals 5 to 8 of the serial number (year / calendar week)
ISO 9001:2015 / ATEX
• Housing M30, embeddable mounting method (flush mountable)
• PDDB according to EN 60947-5-3
• For use in Ex Zones 1, 2, 21, 22
ISD-10-B-GD-S162/S293
PL e
4
SILCL 3
2.47 x 10-8
100
99% / 92 / 4
II 2G Ex db IIC T5 Gb
II 2D Ex tb IIIC T100°C Db IP67
1, 2, 21, 22
embaddable (flush) mountable
x 1mm), at non flush mounting, at EN 60947-2-5
2
0.5-1.5mm
30mm
<100um
DC 13
30VDC
75VDC/50VAC
35mA
0.98W
20ms
200ms
2 x PNP (A1 and A2)
compatible with EN 61131-2 inputs type 1, 2, 3
< 2V, (70mA)
70mA
yes
LED green (OSSD=ON), LED red (OSSD=OFF)
IP67
-10°C < T < +50°C
amb
-45°C ... +70°C
according to EN 60947-5-2
2 , TPU jacket, shielded, leads numbering marked, halogen-free,
diameter: 6.3mm, length: 6m
70mm
2 x PNP-Outputs, Transistors open.
1: +24VDC
3: OSSD A1
4: OSSD A2
2: 0V
Other sensors for not
embeddable installation
method. 1 2 1 2 1 2 3
1 2 3 4 5
A
1 2
1 2 1 2 3 4 5 1 2 1 2
1 2 1 2 3 4 5
1 2
1 2 1 2
1 2 3
1 2 1 2 3
A=laterale distance
Manufacturer with address
II 2D Ex tb IIIC T100°C Db IP67
No. BVS 07 ATEX E044 X DEKRA
No. IECEx 14.0108X
Electical dat according to the chart
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
No object detected, LED red
1: +24VDC
3: OSSD A1
4: OSSD A2
2: 0V
Safe state
IS*-10-B(-GD): For embeddable
installation method
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
1 1 2 3 4 1 2 3 4
1 2 3 4
1 1 2 3 4
1 2 3 4
1 2 1 2 1 2 3 4
= Metal
1 2 3 4
1 2 3 4
A=0mm
Page 1 of 2