Matrix Tippkemper ISS-SIL1-10-B Manual

Inductive Sensors series ISS/ISN/ISD-SIL1-10-B-GD
ISN-SIL1-10-B-GD
• Type: ISD-SIL1-10-B-GD: Applicable in Ex zones 1, 2, 20/21, 22
• Type: ISN-SIL1-10-B-GD: Applicable in Ex zones 2, 22
• For embeddable installation method
• Safety Integrity Level SIL 1
• Performance Level Pl c
II 3G Ex nA IIB T4
II 3D Ex tD A22 IP67 T135°C

Technical Data

Type
Performance Level (PL), at EN 13849-1
Safety integrity level, at EN 62061
Safety-related reliability PFHd,
MTTFd
Type of Ex protection Gas, at 94/9/EG
Type of Ex protection Dust, at 94/9/EG
Applicable in Ex zones
Housing

Installation method

Rated operating distance sn,
Enable zone
Hysteresis
Safe switching off distance s(ar)
Enclosure rating

Supply voltage

Absolute maximum supply voltage Um
Current consumption
Maximum power dissipation
Response time to safety request
Power up delay time

Output function

Output voltage at 24 V
Voltage drop
Current rating
Short-circuit protection
Working temperature range Tamb
Storage temperature range
Connection, type ISD-SIL1-10-B-GD
Connection, types ISS/ISN-SIL1-10-B-GD
Accessories
Accessories, included,
only ISN-SIL1-10-B-GD
Accessories, not included
ISS/ISN-SIL1-10-B(-GD)
Options
Function and
LED indication
Output with dynamic test function
Object detected, Outputs switched ON
+ VDC
0V 10ms
Outputs inactive
200us (Test pulse)
no object detected
Installation:
Lateral protection plates must not rise above the sensor.
Sensors for not embeddable mounting arrangement have the highest operating distance, but
a part of the parasitic lateral electromagnetic field can disturb the safe function. Lateral
protection plates or other metallic objects must not influence the Sensor. For safe function
a lateral free space around the sensor must be guaranteed. The series ISx-SIL1-10-B-GD,
sensors for embeddable mounting, no lateral free space is required (A=0). It's possible
to realize a better mechanical protection and they have a higher immunity against spurious
releasing. In a not embedded mounting arrangement the sensors reach a lower level of
operating distance (sa) then sensors for not embeddable mounting.
ATEX RELATED MARKINGS ON THE SENSOR:
CE 0158
Device type: ISD-SIL1-10-B-GD:
Device type: ISD-SIL1-10-B-G S166:
Device type: ISN-SIL1-10-B-GD:
T : -10°C < T < +50°C
amb amb
Housing M30
Types ISS-SIL1-10-B
SRP/CS - SREC, fail-safe inductive sensor PDF-D, I1A30AP1
at EN 62061
None
None
None
M30, brass, nickel plated / Sensing area: Synthetic, PEEK mod.
10mm, (on steel 37, (sn x 3)
0mm ... 8mm, +-1mm, (on steel 37, (sn x 3)
-10°C < Tamb < +60°C
Cable: TPU, AWM 20236, 4+PE x 0.5mm
- 1x Safety lock device, mount at the cable connection,
for locking the connection. (black synthetic device)
- 1x Warning plate "WARNING - Explosion Hazard - Do Not Dis-
connect While Circuit Is Live Unless Area Is Known To Be Non-
Hazardous", self-sealing, for gluing on the cable connector
- 1x Protection cap for the sensor connector.
- Cord Set Lumberg RKTS 5-298/xx (straight type), or
RKTW/RKWTH 5-298/xx (right angle type)
- Other cable length:
- ISD-SIL1-10-B-G S166:
Object detected, LED green
2 x PNP-Outputs, Transistors conducted.
Manufacturer with address
II 2G Ex d IIC T5, II 1/2D Ex tD A20/A21 IP67 T100°C Certification number: BVS 07 ATEX E 044 X
II 2G Ex d IIB T5
II 3G Ex nA IIB T4, II 3D Ex tD A22 IP67 T135°C
ISD-SIL1-10-B-G S166: T
amb
ISO 9001:2008 / ATEX
ISN-SIL1-10-B-GD
PL c
SIL 1
1.5 x 10 -6
High
II 3G Ex nA IIB T4
II 3D Ex tD A22 IP67 T135°C
2, 22
embaddable (flush) mountable
2 x 1mm), at non flush mounting, at EN 60947-2-5
0.5-1.5mm
30mm
IP67 at EN 60529
24VDC (20VDC to 28VDC)
30VDC
20mA
0.6W
10ms
200ms
2 x OSSD (A1 and A2)
compatible with EN 61131-2 inputs type 1, 2, 3
< 2V, (70mA)
70mA
yes
-10°C < Tamb < +50°C
-45°C ... +60°C
Socket M12, Lumberg type: RSF 5, 5 terminals
2x nuts M30. (Optional 1x clamp)
Up to 100m on request
Working temperature range: -30°C to +55°C,
only Gas Ex: II 2G Ex d IIB T5
2 x PNP-Outputs, Transistors open.
+24VDC
OSSD A1
OSSD A2
0V
Other sensors for not
embeddable installation
method.
A
A=laterale distance
Production date: Numbers 4 to 7 of the serial number
Certification number: BVS 07 ATEX E 044 X
: -30°C < T < +55°C Electrical data according to the chart
amb
ISD-SIL1-10-B-GD
0158
II 2G Ex d IIC T5
II 1/2D Ex tD A20/A21 IP67 T100°C
ISD-SIL1-10-B-GD
II 2G Ex d IIC T5
II 1/2D Ex tD A20/A21 IP67 T100°C
1, 2, 20/21, 22
2 x 1mm)
-10°C < Tamb < +50°C
2 , shielded, Length: 6m
No object detected, LED red
+24VDC
OSSD A1
OSSD A2
0V
Safe state
ISx-SIL1-10-B-.: For
embeddable installation
method
= Metal
A=0mm
Page 1 of 2