Table of Contents
Advertisement
nally plug the accessory power cord to the AC
J jack and a household power outlet (which
PLUG THE POWER
CORDS
INTO AN AC OUTLET
eae
unit's internal memory (such as the last memory) even when the POWER switch is off
(STANDBY).
Therefore, be sure to connect the power cord directly to a wall outlet.
If
the power cord is connected to an outlet such as a switched outlet on an amplifier, the
various memory
contents will be erased whenever the amplifier's power switch is
turned off.
_/
(
ane
4
"
a
USING TELEVISION WITHOUT AUDIO AND
CONNECTING TV AND STEREO AMPLIFIER
VIDEO JACKS
@ Connect the VIDEO OUT jack of the player to the video
input jack of the monitor television.
@ Connect the AUDIO OUT jacks to the stereo amplifier
VHF
AUX, CD, LD, VDP or other jacks, except the PHONO
television
input jacks. The television speakers can also be used
Antenne
by connecting the television audio input jacks and the
LaserDiscs.
Do not change
the television
antenna
and VCR
connections.
wo
ae
3
THE @] MARK
eo.
|
System control can be performed when the player is
combined with an optional AV amplifier, which can
provide centralized control of Pioneer products with the
mark.
Connect the VIDEO OUT jack of the player to the video
disc video input jack of the AV amplifier and. connect
the AUDIO OUT jacks of the player to the audio input
jacks of the AV amplifier
Connect the CONTROL
IN jack of the player to the
Optional
RF modulator
1, Detach the VHF antenna cable from the VHF antenna
CONTROL
OUT jack of the AV amplifier using a
terminal of your TV set, and connect the cable to the
commercially available cord with mini-plugs.
VHF IN terminal of the RF modulator.
e For details concerning the connection and operation
2, Connect the VHF OUT terminal of the RF modulator to
methods, please refer to the operating instructions for
the VHF antenna terminal of your TV set.
the AV amplifier.
-)
3. Connect the socket (3-pin) of the RF modulator to the
ee
at
VHF ADAPTER jacks.
if
=
NOTE:
ATTENUATOR SWITCH
Push the plug in firmly. If the plug is not properly inserted,
When the television speakers are used, the sound may
be distorted. In this case, set the ATTENUATOR switch
\t0 ON to reduce the distortion.
it may result in snow or noise on the screen.
When the sound from a LaserDisc or Compact Disc is
output through a television speaker it becomes monaural
sound (This is the same for a stereo television).
NOTES:
@ Stripe patterns may appear when a LaserDiscis played
ona
television. Mave the antenna cable away from the
power cord to avoid this.
@ Be sure to turn off the power of this player when you
watch a TV broadcast.
Ms
9
<VRB1149>
En
Advertisement
Table of Contents
