Selecting A Sound Field - Sony STR-DE675 Operating Instructions Manual

EQ
LEVEL SOUNDFIELD Selecting a Sound Field
| | • .
Cursor buttons _/_
EQUALIZER
Jog dial
You can enjoy surround sound simply by selecting one of
the pre-programed sound fields according to the program
you want to listen to.
1
Press MODE.
The current sound field is indicated in the display.
2
Turn thejog dial or press the cursor buttons (_ or
_) to select the sound field you want.
See the table starting on page 29 for information on
each sound field.
I'll
o
5'
e-
o
m
o.
o
m
o.
LEVEL button: Press to customize the level parameters.
SURR button: Press to customize the surround
parameters in the current sound field.
EQ button: Press to customize the equalizer parameters
in the current sound field.
Cursor buttons (_/_): Use to select parameters after
pressing the LEVEL, SURR, EQ or SET UP buttons.
Jog dial: Use to adjust parameters and select sound fields
(etc.).
SOUND FIELD buttons:
To turn the sound field off
Press A.F.D. or 2CH (page 24).
"_"_The receiver memorizes the last sound field selected for each
program source (Sound Field Link)
Whenever you select a program source, the sound field that was
last applied is automatically applied again. For example, if you
listen to CD with SMALL HALL as the sound field, change to a
different program source, then return to CD, SMALL HALL will
be applied again. With the tuner, sound fields are memorized
separately for AM, FM, and all preset stations.
"_" You can identify Dolby Surround-encoded software by
looking at the packaging
Dolby Digital discs are labeled with the D,I:I_ logo, and Dolby
Surround encoded programs are labeled with the rlrl_
logo.
A.F.D. button:
Press to set the receiver to
automatically detect the type of audio signal being
input and perform proper decoding (if necessary).
MODE button: Press to activate the sound field
selection mode.
2CH button: Press to output sound from only the
front (left and right) speakers.
EQUALIZER button:
Turns the equalizer effect on or off.
28