Installation Points - BorMann PRO BLF3550 Instructions Manual

EN
INSTRUCTIONS

Installation Points

1. Require the direction to the southwest and the best installation angle with
the horizontal plane. Due to the different latitudes, please refer to the local
best installation angle. See Table 1 below.
2. Require solar panels to be exposed to direct sunlight throughout the day
and not to buildings or trees.Wood and other obstruction to ensure the longest
exposure time (solar energy must not be used) Plate mounted under glass or
indoor). Only by installing solar panels correctly and scientifically can the best
charging effect be achieved.
Usage Method:
1. Check lights
The solar lamp has been charged at the factory and be can turned on normally.
Before installation, please check whether the light can be turned on or off and
cover the solar panel with a book (or keep it in the dark). If the lights show that
the lamps are in good condition, please feel free to install and use them!
Note the following steps when installing during the day:
Step 1: Turn on the switch.
Step 2: Cover the solar panels with paper and check if the lights are on, the
lamp is normal.
Note: The installation and inspection methods of all the above lamps are
roughly the same.
Remote Control Key Instructions
1. Turn ON/OFF button.
2. Light up for 2 hours then start radar mode.
3. Light up for 4 hours then start radar mode.
4. Light up for 6 hours then start radar mode.
5. Full radar mode.
6. Full bright mode.
Ζero electricity
365 days light
Remote
control
2
Wireless
Working time
> 12 hour
Dustproof
WWW.NIKOLAOUTOOLS.COM
Ιnstallation Instructions
Method 1
Ιntelligent Radar Induction Switch
Method 2
Step 1
Leatheroid
Step 2