YOTON YB05 - Video Baby Monitor Manual

Package Contents

Product Introduction

Overview of your Parent unit

1. Switch Button
2. Menu Button
3. Vox
4. Volume(+) Button I Up Button
5. OK Button
6. Brightness (+) I Right Button
7. Volume(-) Button I Down Button
8. Brightness(-) I Left Button
9. Push to Talk Button
10. Music Play Button
11. LCD Display
12. Speaker
13. Bracket

Overview of your Baby unit

1. Camera Lens
2. Light Sensor
3. Infrared LED
4. Microphone
5. Speaker
6. Pairing Button
7. Type-C Power Interface
8. Temperature Sensor

Installation Introduction

Baby unit installation and connection

1. Connect the baby unit with the parent unit:
   
   
2. Mount the baby unit on the wall
   Use the template below to mark the wall at the correct location to drill holes for the wall mounting screws (not provided). The two grooves at the bottom of the baby unit and the screws that have been fixed on the wall are used for hanging and fixing.
   
   

A NOTE:
Do not place the infant unit within the reach of infants! If the picture or sound is disturbed, try moving the device to a different location and make sure they are not close to other electronic devices.

Charging and Power On/Off

1. Baby unit power supply
   Use Baby unit with the power supply continuously powered on.

Parent unit power supply
When the parent unit is fully charged, it can be unplugged and used.

2. Power On/Off
   Press and hold the power button at least 3 seconds to turn on the parent unit, then two units will be connected automatically.

Product Function Introduction

LCD display icon introduction

1. Signal strength indicator
2. VOX sensitivity
3. Alarm clock
4. Lullabies
5. Temperature of the baby's room
6. Battery indicator

Night vision function

The baby unit has 1 high-intensity infrared LED for picking up clear images in the darkness.

Music player

Pressing this button-" " 1 second will turn on the music player and play lullabies in turn, press it for 1 second again to switch to the next lullaby.

Intercom function

Long press the button-" " on the parent unit to talk to your baby.

Volume adjustment

The volume has 8 levels. Press this button " (+)" and this button " (-)" to adjust the volume as your needs.

Turn off the Parent unit

Press and hold the power button at least 3 seconds, the parent unit will be turned off.

VOX Mode setting

Press this button " " turn on the VOX mode.

VOX sensitivity setting

Menu - VOX Mode - High/Medium/Low/Off

Settings

LCD backlight brightness adjustment

1. Press this button " " " " to adjust Brightness.
   

Volume adjustment

1. Press this button " " " " to adjust volume.
   

Q&A

1. Why does the appliance produce a high-pitched noise? The units may be too close to each other.
   Make sure the parent unit and the baby unit are at least 3.5 feet/1 meter away from each other. The volume of the parent unit may be set too high. Decrease the volume of the parent unit.
2. Why don't I hear a sound/Why can't I hear my baby cry?
   1. The volume of the parent unit may be set too low or may be switched off. Increase the volume of the parent unit.
   2. The baby unit and parent unit may be out of range of each other. Reduce the distance between the units.
3. Why does the parent unit react too quickly to other sounds? The baby unit also picks up other sounds than those of your baby.
   The baby unit closer to the baby (but observe the minimum distance of 3.5 feet/ 1 meter.
4. Why is the connection lost every now and then? Why are there sound interruptions?
   1. The baby unit and the parent unit are probably close to the outer limits of the operating range. Try a different location or decrease the distance between the units. Please note that it takes about 30 seconds each time before a connection between the units is established.
   2. You may have placed the parent unit next to a transmitter or other appliance, such as other wireless telephone or 2.4GHz baby monitor.
      Move the parent unit away from the other appliances until the connection is re-established.

Attention

Thank you for purchasing YOTON Video Baby Monitor.
Before you use the device, please read this User Manual carefully.

! This product should be assembled by adults.
! Keep small parts away from children when assembling.
! This product is not a toy, do not allow children to play with it as a toy.
! This baby monitor is not a substitute for responsible adult supervision.
! Do not place the baby monitor cables in the cot or with the baby arm's reach (at least 1 meter away).
! Do not use the baby monitor near water or a heat source.
! Do not touch the power plug with sharp or metal objects.

Warranty

If you have any questions or confusions about our product or warranty, please feel free to contact us.

YOTON Customer After-Sales Service Mailbox: bm.support@yoton.co

Complaint Mailbox:
US: bm.support.us@yoton.co
EU: bm.support.eu@yoton.co
UP: bm.support@yoton.co

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download YOTON YB05 - Video Baby Monitor Manual