Correct Handling Of Machine - Makita RBC220 Instruction Manual

CORRECT HANDLING OF MACHINE
Attachment and detachment of shoulder strap
(For RBC220, RBC221, RBC250. RBC251, RBC225, RBC226, RBC255 and RBC256 only)
1. Adjust the strap length so that the nylon cutting head will be kept parallel with the ground. (Fig. 21)
2. Detachment
In an emergency, pull the release belt strongly upward, and you can detach the machine from you. Be extreme¬
ly cautious to maintain control of the machine at this time. Do not allow the machine to be deflected toward
you or anyone in the work vicinity. (Fig. 22)
WARNING:
Failure to maintain complete control of the machine at all times could result in serious bodily injury or DEATH.
Handling
1. Hang the machine on the right side of your body.
2- Squeeze the throttle lever, and the rotational speed will be increased. Release it, and the engine will run at
idle (low speed). Use a rotational speed suitable for the grass being cut. If the rotational speed is excessively
low, grass may become jammed in the nylon cutting head.
3. During grass cutting, firmly hold the machine to permit easy, controlled handling.
4. Never strike or tap objects with the nylon cutting head.
14