Kenwood KRC-999II Service Manual page 8

RC-999I1
DISASSEMBLY FOR REPAIR
2-2. Down levers A, B
3;
Remove the spring (@), and remove the E ring fixing
the down lever C ass'y '@ ).
. Pull out the down lever C (@).
The roller A is attached to the down lever C ass'y. Be
sure not to lose the roller (@).
. Now, the down lever A and down lever B can be taken
out (@) (@).
© Down lever (B)
ye
| AF
|
@ Down lever (A) zie
spring
2-3. Cassette holder
6.
Remove the screw fixing the Power switch (S903) on the
cassette mechanism, and take out the switch ( ®@) ( ®).
. Remove the E ring fixing the suction lever A, and pull
up the lever ( ®) ( ®).
. Pull out the suction lever B (®).
The roller A is attached to the suction lever B. Be sure
not to lose the roller ().
1
@® Slide switch Scheie
(Power switch) ®
$903
Suction lever (A),
Precision <7
© screw
M2 x8
rt
(Go -
! Roller (A).
A |
@ Tension coil
Roller (A) Mounting Position
for Assembly
Roller (A)
Suction Charge Spring Mounting Method
Boss for suction lever (A)
The side which
is bent at
this position
comes upward,
Suction
/ charge
spring
(Rear)
Roller (A) Mounting |
Position
Cam gear
i:
TZ
Roller (A)