Table of Contents
Advertisement
Do not stand on the product or exert
ARAN
© Doing so may cause the product to become
excessive force.
:
deformed or fall over, resulting in breakdown
or injury.
The product should be located so that its location or position does not interfere with its proper
ventilation. Ensure a minimum distance of 5cm around the product for sufficient ventilation.
Ensure that the ventilation is not impeded by covering the ventilation openings with items,
such as newspaper, table-cloths, curtains, etc.
Do not place naked flame sources, such as lighted candles on the product.
The product should be serviced by qualified service personnel when:
e The power supply cord or the plug has been damaged.
e Objects have fallen, or liquid has been spilled into the product.
@ The product has been exposed to rain.
e The product does not appear to operate normally or exhibits a marked change in
performance.
e The product has been dropped, or the enclosure damaged.
Notes on Repair
Should an abnormality occur in the product, immediately turn the power OFF, disconnect the
power cord plug, and then contact the shop from which the product was purchased.
CAUTION:
To prevent electric ces MAIGA Y wide blade of o pugio to wide slot, N
insert.
ATTENTION: ©
Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu'au fond.
l
Canadian Radio Interference Regulations
This instrument complies with the limits for a class B digital apparatus, pursuant to the Radio Interference
Regulations, C. R. C., c. 1374.
Advertisement
Table of Contents
