Enjoying 2-Channel Sources In Surround Sound - Yamaha YSP-800 Owner's Manual

Enjoying 2-channel sources
in surround sound
This unit can decode 2-channel sources for 5.1 channel
playback so that you can enjoy a variety of surround sound
effects by switching the surround mode.
y
The surround modes are available only when the CINEMA DSP
programs are turned off (see page 51) or when the movie program
is selected as the CINEMA DSP program (see page 50). In
addition, the beam mode must be set to the 5 beam mode, the
stereo plus 3 beam mode or the 3 beam mode (see page 40).
YSP
5BEAM
ST+3BEAM
1
STEREO TARGET
4
MUSIC
7
SPORTS
0
CINEMA DSP
CH LEVEL
TEST
1
Press YSP on the remote control to switch to
the operation mode of this unit.
YSP
INPUTMODE SLEEP
3BEAM
2
3
5 6
MOVIE VOL MODE
8 9
OFF SURROUND
+10
MENU
ENTER
RETURN
2
Press SURROUND on the remote control
repeatedly (or press SURROUND and then
press / ) to switch between surround
modes.
SURROUND
or
SURROUND
ENJOYING SURROUND SOUND
ENTER
PRO LOGIC
PLI I Movie
PLI I Music
PLI I Game
Neo:6 Cinema
Neo:6 Music
Example of the surround
mode display in the front
panel display when the
CINEMA DSP program is
turned off
45