Korg Tastiera i3 Owner's Manual page 31

Other settings
The pitch is off.
… Is the transpose function set correctly?
… Has "MasterTuning" in Setting mode been set correctly, as
well as the keyboard part's octave and other parameters?
… Is the scale set correctly?
Check the settings for "Upper Scale Type" (page 26),
"Style Scale Type" (page 26) in Setting mode.
I hear unwanted noise.
… When the volume for a part is raised, the digital signal pro-
cessing may overload the signal, which could cause distor-
tion or other noises. This is not a malfunction.
Try lowering the volume on each part button.
… You may hear distorted or noisy sounds due to input over-
load with certain effects. This is not a malfunction.
… In certain electrical environments, you may hear noise due
to a ground loop or other factors.
The pedal switch or foot controller connected to the
FOOT CONTROLLER jack don't work as intended.
… The functions or polarity for the pedal might not be set
correctly.
Set the pedal function (Pedal Function) and polarity (Pedal
Polarity) in Setting mode (page 25).
… Is the variable range for the expression pedal set correctly?
Follow the instructions shown in "Calibrating the expression
pedal" (page 30).
I can't record a user song.
… A maximum of 999 user songs can be recorded.
You will need to erase some user songs (page 24).
Cannot play sounds on a device connected
to the MIDI OUT connector
… Is the cable connected to the MIDI IN connector of the MIDI
sound generator?
The device connected to the MIDI OUT
connector cannot be synchronized.
… MIDI clock message is not transmitted from the MIDI OUT
connector of i3.
MIDI signals sent to/from the i3 and my
computer are not being correctly received.
… Is the USB cable connected correctly to the USB TO HOST
port?
The i3 will not let me access Media mode.
… Is your USB flash drive correctly plugged in?
If the USB flash drive is correctly plugged in, you should
see in the display.
31
Appendix