How To Connect Speaker Cables To The Input And Output Terminals Of The Speakers - Yamaha NS-P326 Owner's Manual

How to connect speaker cables to the input and output terminals
of the speakers
For connections, keep the speaker cables as short as possible. Do not bundle or roll up the excess part of the cables. If the
connections are faulty, no sound will be heard from the speakers.
Main/center/rear/rear center speakers
One side of the provided speaker cable has a white broken
line and the other side has no line.
Connect the (+) terminals on both the speaker and the
amplifier using the side with a white broken line. Connect
the (–) terminals on both components using the side with no
line.
For NS-M104 (main speaker)
Red: positive (+)
Black: negative (–)
White broken line
For NS-E114 (rear/rear center speaker) and NS-C104
(center speaker)
Red: positive (+)
Black: negative (–)
Subwoofer's INPUT1/OUTPUT terminals
Connect the (+) terminals on both the subwoofer and the
amplifier using one side of the cable. Connect the (–)
terminals on both components using the other side of the
cable.
Red: positive (+)
Black: negative (–)
8
E-
1
3
2
White broken line
Before connecting
Remove the insulation coating at the extremity of each
speaker cable by twisting the coating off.
How to connect:
For NS-M104 (main speaker)
1
Loosen the knob, as shown in the figure.
2
Insert the bare wire.
3
Tighten the knob and secure the cable.
Test the firmness of the connection by pulling lightly on the
cable at the terminal.
For NS-E114 (rear/rear center speaker), NS-C104 (center
speaker) and subwoofer's INPUT1/OUTPUT terminals
1
Press and hold the terminal's tab, as shown in the
figure.
2
Insert the bare wire.
3
Release your finger from the tab and secure the cable.
Test the firmness of the connection by pulling lightly on the
cable at the terminal.
Note
Do not let the bare speaker wires touch each other as
this could damage the speaker or the amplifier, or both
of them.