Control Panel Features; Comfort Mode - U-Line H-11032 Manual

CONTROL PANEL FEATURES

Comfort
Button
COMFORT BUTTON
• This dehumidification setting automatically keeps
the humidity level in the room between 45-55% RH
based on room temperature.
• When operating in comfort mode, the touch pad
arrow buttons
not be able to set a desired humidity level.
• To turn the comfort mode off and use the touch pad
arrows again, press the COMFORT button until the
indicator light turns off.

COMFORT MODE

Setting Humidity (%)
60 55%
50
40
0
PAGE 8 OF 46
OPERATION CONTINUED
Filter Continue
Button Button
will be deactivated and user will
50%
45%
64.4 77
Room Temperature (ºF)
3PFD22, 3PFD35, 3PFD50
Turbo Timer
Button Button
FILTER BUTTON
NOTE: The filter light (clean filter indicator light)
will illuminate after 250 hours of fan motor
operation. This feature is a reminder to clean
the air filter for more efficient operation of the
dehumidifier.
• Reset the timer, after cleaning the filter, by pressing
and holding the FILTER button until the light turns off.
• If the unit is being used in a dusty and cold
environment like a basement or crawlspace, it is
recommended that the filter be cleaned more often.
CONTINUE BUTTON (CONT.)
• Press to activate the continuous dehumidifying
mode. In this mode, the compressor and fan will run
continuously.
• To turn the continuous feature off, press the CONT.
button until the indicator light turns off.
• When operating in continuous mode, the touch pad
arrow buttons will be deactivated, and user will not
be able to set a desired humidity level.
LED Display
Humidity Set Power
Control Button
0124 IH-11032