Advertisement
'For Playback -
To S-Video
Edit
input Socket
i
S-video
Cord
(supplied)
Adaptor
SOC
Socket
AC Adaptor
Output
Socket
Connection cables
for the different
television models
are optionally available
from your video dealer.
-76-
@ Place the VTR into the recording pause mode, at the point
where the dubbing is to start.
@ Set the Edit Switch on the S-VHS Movie to "ON".
(3) Locate the exact point on the tape in the S-VHS Movie from
where you want to start copying and put the S-VHS Movie into
the still playback mode.
@ Press the Pause/Still Button on the S-VHS Movie and on the
VTR to start the copying.
@The picture quality of a copied tape is inferior to that of the original
tape.
If the VTR used for dubbing features 2 tape speeds, select the
normal speed (SP mode) for the best result.
eWhen a tape, that was originally recorded on the S-VHS Movie
and that later has some scene added on a VTR by using the
Insert Editing function, is again played back on the S-VHS Movie,
the playback of the inserted part may be affected by uneven
colour and coloured stripes.
Advertisement
