Panasonic PV-V4021 Operating Instructions Manual page 9

a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
Auto Set operation. Settings are
performed automatically. If the setup is
compieted, the following screen is
displayed.
' Press CHA Key to start Channel/Clock
(vCrA [CL CHANNEL
5/13/2001 SUN 2:20PH
DST :ON
SETTING : CH 10
AUTO CLOCK SET
COMPLETED
END CH UP KEY
If "Auto Clock Set is Incomplete"
screen appears, set the clock using
MANUAL CLOCK SET procedure shown
below.
AUTO CLOCK SET IS
INCOMPLETE
PLEASE SET CLOCK BY
PRESSING ACTION KEY
WiFeTalers| R@a (ele) @cy-) a u
If Auto Clock Set was incomplete, manually
set the clock as follows.
Press ACTION Key on the Remote to
display CLOCK Menu screen.
[VCR OCK|_ CHANNEL |
SELECT MONTH
SELECT :4 ¥
XIT_ ACTION
Press A ¥ to select the month and P to
set. In the same manner, select and set
the date, year, time, and DST (daylight
saving time).
[VCR [CLOCK {CHANNEL
14/11/2001 SUN 12:00PM
OST:ON
SET COMPLETED
SET ia
AAT _;ACTI
3 Press ACTION Key twice to start CLOCK
and exit.
POWER
VCR
VCR/TV
SELECT/
ACTION
CH A/¥
Mode! PV-V4521 remote shown.
Reset All VCR Memory Functions
Use when moving VCR to new
location, or if a mistake was made in
the Initial Setup section.
* Make sure a tape is not inserted in
the VCR.
1 Turn VCR
Power on.
2 Press and hold both
PLAY and CHANNEL
A on the VCR for
more than 5 seconds.
¢ The power shuts off.
3 Do "Initial Setup" on page 8.
(uoljD
=}
aa
I
~"
oO)
=
S
x)