Panasonic PV-V4021 Operating Instructions Manual page 20

Search System
For each recording, an invisible index mark is placed
on the tape. A program index and information are also
included for timer recordings. These marks are used to
access or scan recordings.
Tate {=> @o1-7- eed) Program End Search
Locates end point of recording for
Pp Press SEARCH* continuity.
Sane NORA || to display SEARCH Press SEARCH twice
| romwaso scarcer |} in Stop or Play to display SEARCH in Stop or
TOP mode. Play mode.
NEXT °S
f EXIT STOP
Press FF
2 ee ee Press number keys to start
to select recording PROGRAM
number. SEARCH START : FF END SEARCH.
* To calculate
number, see below. EXIT SEARCH
Press FF or REW
to start search. Examples of Program End Search.
Fig. 1
ney Pegs Fe) 6) |
INDEX SEARCH Program 1 Program 2 or BLANK
search end. To bp ee an | lS : |
search forward or Presa SEARCH burton End Point
back 1 index, ed
aera) os pressFForREW Fig.2
while screen left
is displayed (10
S@C.).
BL Progam Wf perann IB] Program 2 if BLANK)
y
FF End Point
Wi To Calculate Index Number
To go to rec. 2 from rec. 4, enter 3 and press REW.
aN aa' i "10g
7 A j
in As a sworn
Example 2: =
oN NON i i
-->search continues 7 sec. past end point,
-->tape plays to end point and stops.
NOTE: | indicates start points of each recording. sei a P P
* If Index Search is started very close to * If Program End Search is started very
an index mark, that index mark may not close to an index mark, that mark may be
be counted in the search. skipped over.
¢ To cancel, press PLAY or STOP.
|
To go to rec. 6 from rec. 2, enter 4 and press FF. Upon locating end point,