Panasonic PV-V4021 Operating Instructions Manual page 23

'Important: If a remote conirol button does not work when pressed, press
the VCR button on the remote and try the button again.
Weak Signal Display ON/OFF Feature
When "ON," picture is displayed regardless of signal
strength.
DISPLAY
SELECT/ 1 Press ACTION
SET to display menu.
A:PLAY
V :STOP SST tte
> :FF
<@:REW
SEARCH Hees a
> SET to select and display
WERAC SIGNAL TISMEAY | Ort CHANNEL,
ACTION press AV
to select WEAK
RESET SIGNAL DISPLAY,
and press P to set
COPNIEN ON or OFF.
TAPE «ON: Picture is displayed regardless of signal
condition, and may not always be clearly
POSITION Vacible:
OFF: Screen turns solid blue when signal is weak
or non-existant.
* Selecting ON has no effect on connected
equipment with blue back feature.
Model PV-V4521 remote shown.
Press ACTION
to return to normal screen.
VCR Lock Feature Auto Shut-Off Feature
om
hold down REC on : o
} VOR LOCK ACTIVATED the VCR in Stop ane
mode with no tape 2 [rate "or |] Press AV
inserted for 7 sec. cnet | to select AUTO SHUT-
(Please ignore the VOR's OUTPUT CH 3 OFF and press >
NO CASSETTE
warning.) SELECTiay Ser to set ON or OFF.
To turn off,
Ven ae Orr repeat above.
Press ACTION
to return to normal screen.
« VCR Lock cancels in 24: hours if
clock is set.
23