Caring For Your Stainless Steel; Installation Options; Design Guide (Zdwi240, Zdwr240, Zdbi240, Zdbr240) - Monogram ZDWI240 Installation Instructions Manual

INSTALLING THE CUSTOM FRAME
PANEL
Go to page 6 for custom frame panel size, depending on
your cabinet size and style.
• Install a custom handle of your choice onto the custom
panel before the panel is secured to the door.
• The custom panel should be installed before sliding the
product into the installation location.

INSTALLATION OPTIONS

All models may be installed in any of these options using the installation design guide provided. Note the descriptions
below:
FREESTANDING
The product will have no cabinet around it and no countertop above it.
SINGLE STANDARD
The product will be installed inside a cabinet opening, a countertop will be above it and the door face will NOT be flush
with the adjacent cabinets.
SINGLE FLUSH INSET (NOT FULLY INTEGRATED)
The product will be installed inside a cabinet opening, a countertop will be above it and the door face WILL BE FLUSH
with the adjacent cabinets.
SIDE-BY-SIDE (DUAL) INSTALLATIONS
For a complete refreshment center, other undercounter products can be installed side by side. Please refer to the spe-
cific products and the dual design guide chart for the desired installation configuration requirements. The pair can be
Standard or Flush Inset installed, both units need to match install type.
31-1000646-2
Design Guide
CARING FOR YOUR STAINLESS
STEEL
• Before installation or first use, we strongly advise that
you polish the stainless steel exterior and handle with
a commercially available stainless steel cleaner such
as Stainless Steel Magic.™ To preserve and protect
the fine finish, we also strongly advise that you apply
stainless steel cleaner monthly.
5