What's Included; Hardware Compatibility; Software And Hardware Installation; System Restore Point - NaturalPoint TrackIR 5 Manual

TrackIR 3 Series hardware or newer
Windows Vista or newer
60 megabytes of free hard disk space

3.2 What's Included

TrackIR 5
TrackClip

3.3 Hardware Compatibility

The TrackIR version 5.x software can only be used with the TrackIR 3 (with Vector Expansion only), TrackIR 4, and
TrackIR 5 hardware. Older versions of the TrackIR are not compatible, and will not work with this software. The
software will present a warning if incompatible hardware is detected

3.4 Software and Hardware Installation

Note : For best results, we recommend installing the TrackIR Software before you connect the TrackIR hardware.

3.4.1 System Restore Point

It is recommended that before installing any new hardware or software program, you set a system restore point.
Windows Vista and Windows 7 provide this feature to allow you to easily reset your system to a previous state. After
the software is installed and everything is working fine, set another restore point. Users that get into the habit of using
this feature find they have fewer problems on their computers.
The System Restore program can be found by clicking :
Vista / Windows 7 : Start/Search "restore"/System Restore
3.4.2 Software & Drivers Installation
Note : The TrackIR version 5.x software does not support Windows XP or older.

3.4.2.1 Windows Vista and newer

Quickstart guide