Visual Preview; D View - NaturalPoint TrackIR 5 Manual

Status LEDs Enabled
Turns the camera status LEDs on or off.
Status LEDs Brightness
Adjusts the brightness of the camera status LEDs. Adjustments do not affect tracking. This feature works with a
TrackIR 5 camera only.
Light Filter Threshold
Used to control how much light TrackIR can see. A higher setting will result in more light being filtered out. If TrackIR is
used in areas with bright or harsh lighting, the slider may need to be set to a higher value to filter out unwanted
reflections caused by these lights. Increasing light filtering too high may reduce tracking precision.
Note : Make sure that Camera View is activated in the preview display to monitor how much light is being filtered.
IR Brightness
Adjusts the brightness of TrackIR's infrared lights. When the light filtering threshold option is increased to filter out
unwanted reflections from ambient light, you can also increase TrackIR's IR light brightness. Doing this will make the
reflective markers on the TrackClip easier for the camera to track.
Camera Rotation
Choose the correct rotation of the TrackIR unit if you have clipped the unit to any part of your monitor. If TrackIR is
upright, then the rotation should be set to 0. If the unit is positioned on its left or right side or is upside down, then the
rotation should be set to 90, 270 or 180 degrees respectively.
Video Processing Mode
Standard
Standard mode is intended for use with TrackIR 3 or 4. It should only be used with TrackIR 5 under extremely
bright lighting conditions when the tracking screen is flickering and tracking is highly unstable. Please consult
technical support before using this mode with TrackIR 5.
Precision
Precision mode is intended for use with TrackIR 5 and cannot be used by previous generations. It offers superior
resolution and tracking stability.

5.9 Visual Preview

5.9.1 3D View

The 3D preview window provides instant feedback on what impact speed and smoothing and curve adjustments will
have on your in game view control. You can customize the camera position, load panoramic backgrounds and
wireframe grids, view third person head previews, and toggle the HUD on and off.
Perspective