Philips CMQ205 - annexe 1 Manual page 6

•
Use speakers with an impedance of 2 to 8 ohm
(4 to 8 ohm when used as a bridged amplifier).
• Match the "left", "right", "+" and "-" terminals
correctly. Revised polarity may degrade sound
quality.
4 ohm 4 ohm
speaker speaker
4 ohm
speaker
4 ohm 4 ohm
speaker speaker
8 ohm speaker
(30A)
(30A)
(30A)
Connect the amplifier to the car audio with an
RCA cable (not supplied).
Connect the amplifier to another amplifier.
Make the power connection as illustrated
below:
• Connect the ground wire from the
car to the
• Connect the remote wire from the
car audio to the
• With this connection, you can turn
on/off the amplifier with the car
audio.
• Connect the power wire from the
car battery to the
socket.
socket.
socket.
7