QUAD Artera Solus Play User Manual page 16

Repeat Play
• Press the Repeat key once to repeat one track continuously. The Repeat 1 icon appears briefly on screen. You can also select a
• new track and this will be continuously repeated. Press the info key on the handset, the Repeat 1 icon will be displayed.
Repeat 1
• Press the Repeat key twice to repeat all the tracks on the disc continuously. The Repeat All icon appears briefly on screen.
• Press the info key on the handset, the Repeat All icon will be displayed.
Repeat All
• Press the Repeat key again to cancel repeat mode, the Repeat Off icon appears briefly on screen.
Stopping a disc
(1) Press the Stop key on the handset. If Random or Repeat play is selected, pressing Stop key does not cancel these options. They
(1) must be cancelled as described above.
(2) Eject and load the disc, play stops and the disc reloads. All options are reset.
Program Play
You can programme a sequence of tracks to play in any order of your choosing. Program mode can be accessed from the handset
only when the disc is stopped.
Example: to enter a programme of three tracks (The displays shown below are the cases when the info key is pressed on the
handset.
(1) Stop the CD playback.
(2) Press the Prog button on the handset, Program On appears briefly on screen then the Program screen deploys. NO Track will
(2) be displayed.
(3) Enter a track with the number keys. The track number flashes.
(4) Press Store to program the track.
(5) Enter another track (or the same track) with the number keys.
(6) Press Store to program the track.
(7) Repeat the procedure to enter all three tracks.
(8) When all the tracks are entered:
To play the program: press
To cancel a program during programming: press the Stop key, program Off appears briefly on screen.
15