Table of Contents
Advertisement
1.2 INSTALLING THE TERMINAL
To install the VIP7201 terminal, pro-
ceed as follows:
CAUTION
AVOID CONDENSATION
PROBLEMS. Allow cold
VIP7201 to warm to room
temperature for at least
1 hour before turning ON
the power.
1. Connect keyboard cable.
I
, I'
KEYBOARD
CABLE
NOTE
IMPORTANT!
Before plugging power cable
into wall outlet, make sure
power switch is in OFF (out)
position.
2. Connect power cable.
115 VAC
The keyboard can be tilted by pulling out the
two pegs, located in the bottom of the key-
board, and turning them to lock.
1-2
CP91-00A
Advertisement
Table of Contents
