IAR SYSTEMS STZ-SECAPP-V1 User Manual page 4

WARNINGS
DO NOT operate the equipment in overheat condition.
Keep the equipment away from the sun and do not operate if the
operating temperature is seriously above or below the recommended
range.
NEVER OPEN the casing.
Doing so voids your warranty.
The unit contains lithium-ion batteries, which are likely to cause a
fire if misused, punctured, or damaged.
DO NOT make any modifications to the product.
Only use the approved power source (AC/DC adapter) which
comes included with the kit.
DO NOT use the equipment in the presence of flammable gas.
Do not use electronic equipment in the presence of flammable gas as
this could result in high risk of explosion or fire.
DO NOT use the equipment in case of a power failure or general
equipment failure. Contact customer support for assistance.
ALWAYS USE the appropriate cables for the input/output ports,
supplied with the product.
NEVER REMOVE the batteries from the equipment.
If a replacement is needed, contact customer support for assistance.
DO NOT apply any mechanical stress/shock to the equipment
while it is in operation.
DO NOT use the equipment outdoors.
It is only intended for indoor usage. Do not route any cable outdoor due
to the risk of lightning strikes.
Access to the power supply outlet must not be obstructed.
The Security Appliance MUST be charged for three hours at least
once every three months to ensure proper operation.