Download Print this page
Jamara High End MG 13/18 Instructions

Jamara High End MG 13/18 Instructions

Advertisement

Quick Links

High End MG 13/18
Nr. 033216
DE - Gebrauchsanleitung
GB - Instruction
Allgemeine Hinweise
JAMARA e.K. übernimmt keine Haftung für
Schäden, die an dem Produkt selbst oder durch
dieses entstehen, sofern diese auf falsche
Bedienung oder Handhabungsfehler zurück-
zuführen sind. Der Kunde allein trägt die volle
Verantwortung für die richtige Bedienung und
Handhabung; dies umfasst insbesondere die
Montage, den Ladevorgang, die Verwendung bis
hin zur Wahl des Einsatzbereiches. Bitte beach-
ten Sie hierzu die Bedienungs- und Gebrauchs-
anleitung, diese enthält wichtige Informationen
und Warnhinweise.
Konformitätserklärung
Hiermit erklärt JAMARA e.K., dass das Produkt‚
„High End MG 13/18, Nr. 033216" den Richtlini-
en 2014/30/EU und 2011/65/EU entspricht.
Der vollständige Text der EU-Konformitätserklä-
rung ist unter der folgenden Internetadresse ver-
fügbar: www.jamara-shop.com/Konformitaet
Technische Daten:
Spannung
Stellkraft (kg/cm)
Stellzeit (Sek./60°)
Getriebe
Kugellager
Abmessungen (mm)
Gewicht (g)
4,8V ~ 6,0 V
11,8 kg/cm (4,8 V)
13,1 kg/cm (6,0 V)
0,20 Sek. (4,8 V)
0,18 Sek. (6,0 V)
Metall
2BB
51 x 40,5 x 44,3
55 g
General information
JAMARA e.K. is not liable for any damage
caused to the product itself or through this,
provided this is due to improper operation or
handling errors. The Customer alone bears the
full responsibility for the proper use and hand-
ling, including without limitation, the assembly,
the charging process, the use and choice of the
operation area. Please refer to the operating and
user instructions, it contains important informati-
on and warnings.
Certificate of Conformity
Hereby JAMARA e.K. declares that the product
„High End MG 13/18, Nr. 033216" complies with
Directive 2014/30/EU und 2011/65/EU. The
full text of the EU Declaration of Conformity is
available at the following Internet address:
www.jamara-shop.com/Conformity
Technical data:
Nominal tension
Torque (kg/cm)
Transit time (Sec./60°)
Gear
Ball bearing
Dimensionis (mm)
Weight (g)
4,8V ~ 6,0 V
11,8 kg/cm (4,8 V)
13,1 kg/cm (6,0 V)
0,20 Sek. (4,8 V)
0,18 Sek. (6,0 V)
Metal
2BB
51 x 40,5 x 44,3
55 g
11/24

Advertisement

loading

Summary of Contents for Jamara High End MG 13/18

  • Page 1 Certificate of Conformity Hiermit erklärt JAMARA e.K., dass das Produkt‚ Hereby JAMARA e.K. declares that the product „High End MG 13/18, Nr. 033216“ den Richtlini- „High End MG 13/18, Nr. 033216“ complies with en 2014/30/EU und 2011/65/EU entspricht. Directive 2014/30/EU und 2011/65/EU. The Der vollständige Text der EU-Konformitätserklä-...
  • Page 2 Irrtum und technische Änderungen vorbehalten. Copyright JAMARA e.K. 2024 Kopie und Nachdruck, auch auszugsweise, nur mit Genehmigung von JAMARA e.K. All rights reserved. Copyright JAMARA e.K. 2024 Copying or reproduction in whole or part, only with the expressed permission of JAMARA e.K. Consignes de recyclage Disposal restrictions Les appareils électriques ne doivent stric-...

This manual is also suitable for:

033216