Define Instruments G3 IoT Manual page 5

<Blank>, '-U2', '-U4', '-U6', '-U8', '-U10', '-U12', '-U14', '-U16'
Followed by any one of:
<Blank>, '-P4', '-P8', '-P12', '-P16', '-P20', '-P24', '-P28', '-P32'
Followed by any one of:
<Blank>, '-AO2', '-AO4', '-AO6', '-AO8'
Not all combinations are valid due to physical restrictions on the total number
of channels. An example of an ordering code with a non-standard Analog O
configuration would be: 'G3-OT-HV-ETH-U2-P4-AO2-DO8'
Digital O
Leave blank for no additional Digital IO
ADD 8x Isolated open collector outputs
ADD 16x Bipolar digital inputs
ADD 16x Isolated open collector outputs
ADD 32x Isolated open collector outputs
ADD 1x Sensor Bus
ADD
2x Sensor Bus
ADD 1x Sensor Bus
16x Bipolar digital inputs
+
Factory Option (*2)
When left blank, process inputs A and B are configured as two 4-20mA
inputs. This is the standard ordering option.
Analog inputs A and B configured as 2x 0-10V inputs
Analog inputs A and B configured as 1x NTC temperature input
1x 0-10V input
Analog inputs A and B configured as 1x NTC temperature input
1x 4-20mA input
Analog inputs A and B configured as 2x NTC temperature inputs
Analog inputs A and B omitted from the product (no connector)
*2 Factory Option codes are available only to customers that meet MOQ thresholds. For
normal orders this section will be blank. The Factory Option may be any one of:
<Blank>, '-VV', '-TV', '-TA', '-TT', '-XX'
Accessories
Required Accessories (Sold Separately)
USB Bridge Key, required for programming
© 2024 Define Instruments
16x Isolated open collector outputs
+
G3 IoT Manual | Doc No: 2303-00000-0-1 | Rev: 24V05 | 19 Mar, 2024
16x Bipolar digital inputs
+
32x Bipolar digital inputs
+
(Optional)
-DO8
-D16
-DO16-D16
-DO32-D32
-SBS1
-SBS2
-SBS1- DO16-
D16
(Optional)
-VV
AND -TV
AND -TA
-TT
-XX
BRIDGE-KEY
5