Advertisement
MAINTENANCE AND CLEANING
For best results, the ceramic surface
should be cleaned after every use. Use
a clean cloth, which has been dipped in
warm, soapy water (use liquid AJAX or
a washing up liquid).
Cleaning agents that contain bleach
should NOT be used as they may dull
the surface finishes.
Harsh abrasives
should also be avoided.
All spills must be cleaned up
immediately, while the hob is still warm.
Spots caused by utensils with
aluminium bases, by burned grease, or
by chalk deposits, etc., can be removed
by polishing with the cleaning agent
supplied with the hob. In extreme cases,
polishing may have to be repeated
several times in order to remove the
blemish entirely.
After cleaning any part of the hob, the
ceramic surface should be polished
using a suitable cleaning agent.
Cleaning Borders and Edges
Take care to avoid the hob trims when
cleaning the ceramic glass as they may
be damaged by the cleaning agents.
Take care not to switch on the hob
unit by accident whilst cleaning the
control panel.
WARNING!
Never use scouring powder, scouring
sponges, or any other cleaning agent
which can scratch the ceramic surface.
Daily Cleaning of the Ceramic
Surface
Use the recommended Hob Brite
cleaner daily. If spillage is not allowed to
burn on, it is much easier to clean off.
1.
Apply a small amount af Hob Brite
to the centre of each area to be
cleaned.
2.
Dampen a clean paper towel or a
plastic pad made especially for
non-stick saucepans and rub
vigorously until all marks are
removed. This may take a few
minutes.
3.
Wipe off any cleaner residue with
another damp paper towel and
polish dry with a soft cloth.
If Hob Brite is unavailable, one or more
of the cleaning agents below may be
used temporarily:
a)
Flash Cream Cleaner.
b)
Jif Cream Cleaner.
c)
Baking Soda.
To Remove Stubborn Marks
1.
Hob Brite can be used to clean off
more stubborn stains or to remove
discolourations.
2.
Use a plastic pad made specially
for non-stick saucepans with Hob
Brite for removal of more stubborn
soilage.
To Remove Burnt On Spillage
1.
Make sure the ceramic glass is
cool.
2.
Use a safety scraper at an angle of
30° to remove as much soilage as
possible.
3.
Use Hob Brite to finish off as
directed above.
6
Advertisement
