Advertisement
1:1 up-down control
Splice or knot to roller at
pivot base.
Hold the block in one hand and use your index
finger to press on the release latch. The spring in
the hinge base will open the sideplate for loading
onto the sheet.
Close and latch the sideplate.
IMPORTANT! Do not load sheave when sideplate
is unlatched. Make sure sideplate is latched before
loading.
Rigging Options
Make sure sideplate is latched.
2:1 up-down control
Use a control line around
roller at pivot base.
Use
2
Advertisement
