VELA Assembly guide for accent chair Scan the QR code to watch the assembly video. Need help? support@cozey.com +1(888) 828-8371...
Page 3
What’s in your Cozey box Accent Chair Front Leg (x1) Rear Leg (x1) Seat Shell (x1) Backrest Shell (x1) Seat Cushion (x1) Backrest Cushion (x1) Legend Hand Screw M6 Screw Rubber Bushing (x4) (x4) (x4) Allen Key (x1)
Page 4
Empty the box. Assemble the front leg and the rear leg together using the hand screws. Use the Allen Key to tighten the hand screws .
Page 5
Flip the chair on it’s upright position. Place the rubber bushings into the rear leg and cross beam recessed holes.
Page 6
Screw the seat shell into the cross beam rubber bushings using the M6 screws. PRO TIP Insert M6 screws into the seat shell holes. Align M6 screws with the rubber bushing holes. Screw in place, use the Allen key to tighten the screws. Make sure to follow the orientation sticker.
Page 7
Screw the backrest shell into the rear leg rubber bushings using the M6 screws. PRO TIP Insert M6 screws into the backrest shell holes. When properly tighten, there will be a normal gap between the rear leg frame and the backrest shell.
Page 8
Place the seat cushion. PRO TIP Remove velcro protection piece. Align orientation stickers.
Page 9
Place the backrest cushion. PRO TIP Remove velcro protection piece. Align orientation stickers.
Need help?
Do you have a question about the VELA and is the answer not in the manual?
Questions and answers