Setting At Programmable Controller Side (Melsec Iq-F Series); For Serial Connection - Brother MELSEC iQ-F TD-4420TN Program Reference Manual

4. Setting at programmable controller side (MELSEC iQ-F series)

The sample program display is shown as the following. After the setting by GX Works3, write the program and
PLC parameter in the programmable controller.

4.1. For serial connection

CPU parameter setting

The setting remains as default condition.
Registration of module labels

Select [Element Selection] → [Module] → [Module Label] → [FX5UCPU], and right-click [Add Module
Label].
Set as shown above.
14
MELSEC iQ-R Brother Label Printer Sample Program Reference Manual