Questions And Answers - Olympus OM-2 Instructions Manual

QUESTIONS
&
ANSWERS
Q :
My camera is loaded with film. Why doesn't the reo
wind knob rotate when I advance the film?
A : The film leader may not be inserted in the film take·
up spool and the film is not advancing. (See page 9.1
Q:
Why can' t advance the film?
A : The shutte r may be cocked and ready to fire . Try
pressing the shutter release button . (See page 10.1
Or, the film may be fully exposed . Check the expo-
sure counter . If you feel tension on the film advance
lever, DO NOT FORCE IT . Rewind the film . (See
page 20.1 Or the self-timer lever is not securely in its
upright position , reset and release the self-t imer. (See
page 21.1
Q: Why won ' t the shutter release button move when I
press it?
A : The film advance lever may not have been fully ad ·
vanced . (See page 9.)
Q:
I can't advance the film nor release the shutter, and
the viewfinder is totally dark . Why?
A: The mirror is locked up because the batteries are de-
pleted or the film was advanced in the middle of an
automatic exposure . Press the selector lever to the
"CHECK ·RESET" position to unlock the mirror .
(See page 8.1 Two batteries should be replaced toge·
ther if they are depleted.
Q:
Why won't the rewind crank turn when I try to re-
wind the film?
A : The rewind release lever may not be .rotated in the
arrow direction until it aligns with the "OM·2 " mark·
ing . (See page 20.1
Q.
Why can't I set the ASA film speed I need?
A : At the most 3 stops can be increased or decreased in a
single stroke of the dial. If you require more stops,
lift up and rotate the outer collar of the dial until it
stops; then releasing the colla r and reverse the collar
39
and dial together until the white line is aligned with
the black index on the pentaprism. Repeat this pro·
cedure until you reach the ASA speed you need . (See
page 11.1
Q :
What batteries should I use?
A : Use two 1.5V silver oxide batteries [Eveready (or
UCAR) 8-76, EPX -76 or equivalents]. Never use 1.3V
mercury batteries. (They are the same size) . (See page
7.1
Q:
Why doesn't the battery chamber cap fit?
A : If you also own an OM·l, you may have the caps
mixed up . Although they look alike, the OM·2 cap
has a "2" engraved inside .
Q:
When should I check the batteries?
A:
(1) When new batteries are inserted . (2) After the
camera hasn 't been used for a long time. (3) Before a
pro longed period of use.
Q.
Can film be properly exposed when the selector lever
is in the "OFF" position?
A : The OM·2 is designed to always expose the film loaded
faster than approximately 1/30 second(ASA . 1 00) with
the selector lever at the OFF position . If the shutter is
unintentionally released in darker condition on
"OFF" mode , the exposure automatically stops in ap-
prox. 1/30 second (ASA 100) to save unnecessary bat-
tery exhaustion.
Q :
Can I set the shutter speed ring to any position to take
pictures on AUTO mode?
A; Any position except " B" .