Download Print this page

Maintenance; Environment Protection - Sealey MW160BC Quick Start Manual

200a mma inverter welder & battery charger/starter

Advertisement

4.4.
START CAR
4.4.1. Plug in and turn on the power switch (fig.1).
4.4.2. Select the charger function, and then select the start function.
4.4.3. According to the battery's nominal voltage, choose the correct output voltage (12V or 24V).
4.4.4. Connect the red charging clip to the red output terminal (positive) of the machine, and the black charging clip to the black output
terminal (negative) of the machine.
4.4.5. Connect the red charging clip to the positive pole (+) of the battery and the black charging clip to the negative pole (-) of the battery.
4.4.6. Preset starting current.
4.4.7. Press the "accept" button to start the car (fig.2).
5.

MAINTENANCE

WARNING! Incorrect equipment maintenance can cause personal injury or death.
Always use an authorised service centre for repairs/maintenance.
9
Turn off the power supply and unplug the device before carrying out any maintenance.
9
Ensure that cables, ground wires, connectors, main leads, and power cords are working properly.
9
Keep the equipment safe and intact.
9
DO NOT abuse the device. Only use the device for tasks it is designed for.
8
DO NOT replace any spare parts - use an authorised serviced centre.
8

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved
containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
MW160BC
Issue 2 (2,3)
REGISTER YOUR
PURCHASE HERE
13/11/23

Advertisement

loading