Panasonic RX-ES50 Operating Instructions Manual page 19

Portable stereo cd system
Hide thumbs Also See for RX-ES50:
Table of Contents

Advertisement

The unit will record only one track you selected, and stops
automatically.
Preparation: Insert the CD.
Load the tape with the side to
be recorded facing up.
• Find the postition on the tape where the
recording is to start.
•The direction is automatically set to re¬
cord on the side facing up (£> display
lights).
• When recording from the start of side A
or B, have the leader tape wound up
before proceeding (see page 16).
Press B/CLEAR.
CD REC
MODE
Press CD REC MODE to dis¬
play "1-REC".
AUTO—»1-REC—»OFF
t_!
(The display changes each time the but¬
ton is pressed.)
CDmjNEfTIME
Press ►»/+ or «*/- to se¬
lect desired track.
If you are going to record first track on the
CD, skip this step.
Press •/• 11.
CD play and recording starts at the same
time.
• Recording stops automatically after the
selected track is finished.
•Only part of a track may be recorded at
the end of the top side. This track will be
re-recorded in its entirety at the begin¬
ning of the reverse side (when the re¬
verse mode is set to ;£::>).
To record another CD insuccession:
Press * of the disc lid and replace the CD, then follow steps 4 and 5.
To stop recording:
Press ■.
CD play also stops at the same time.

Advertisement

Table of Contents
loading

Table of Contents