Related Manuals for TechniSat iMETEO X2
Summary of Contents for TechniSat iMETEO X2
- Page 1 X2 user manual Weather station with temperature, humidity measurement function, equipped with an external wireless measuring sensor.
- Page 2 Notes on recycling Your new device was protected by packaging on its way to you. All materials used are environmentally friendly and recyclable. Please help dispose packaging environmentally friendly manner. Please contact your retailer or local waste disposal facility for information on current disposal methods.
- Page 3 In the event of improper disposal of this product, penalties may be imposed in accordance with national legislation. 1. Introduction Security Read all safety instructions carefully and keep them for future reference. Always follow all warnings and instructions in this manual and on the back of the appliance.
- Page 4 - Never attempt to repair a defective unit yourself. Always contact one of our customer service centres. - Do not open the unit under any circumstances - this can only be done by a specialist. - Foreign bodies, e.g. needles, coins, etc., must not fall into the unit.
- Page 5 2. Special functions of the device - DCF radio clock - Time format 12 or 24 hours - Calendar to 2099 - Display of days of the week in 7 languages: English, German, Italian, French, Spanish, Dutch and Danish. - Alarm and snooze function Humidity: - Measurement range: 20% - 95% (base station) Temperature:...
- Page 6 3. View of the device Base station Buttons on the back of the unit: MODE, ALARM, UP, DOWN, WAVE, LIGHT/SNZ. External sensor - Transmission frequency: 433.92 MHz. Power: 10dBm. - The transmission range is up to 60m (200 ft). - Insert 2 batteries into the transmitter, Ensure correct polarity.
- Page 7 [symbols "+" and " -"], close the battery cover or connect the 4.5V DC power supply to the power connector. - When the batteries are inserted (or the power supply is connected), the segments of the display will i l l u m i n a t e , the unit will beep and display the current indoor temperature and humidity readings.
- Page 8 DCF was received successfully. - It is recommended that the product is placed at least 2.5 metres away from any sources of potential interference such as televisions, computer monitors or power supplies. - Signal reception is weaker in rooms with concrete walls (e.g. basements) and in offices.
- Page 9 DOWN to set the 12 or 24 hour mode. - Press the MODE button to confirm the setting, the time digits will start flashing on the display. Use the UP and DOWN buttons to set the time correctly. - Press the MODE button (B1) to confirm the setting, the minutes will start to flash on the display.
- Page 10 Pressing the ALARM button again deactivates the alarm. Alarm deactivation - During the alarm, press any button except SNOOZE/LIGHT (available on the back of the station) or LIGHT (available on the front) to switch off the alarm. There is no need to re-activate the alarm, it will automatically sound at the same time the next day.
- Page 11 Customer Service Tel: 071 310 41 41 e-mail: biuro@technisat.com TechniSat Digital Sp. z o.o. hereby declares that the IMETEO X2 me- teorological station complies with Directive 2014/53/EC, RoHS. The full text of the EU declaration of conformity is available at hמּp://konf.tsat.de/?ID=23022...
- Page 12 10. Manufacturer TechniSat Digital Sp. z o.o. ul. Poznańska 2, Siemianice 55-120 Oborniki Śląskie 11. Power supply specifications Input: AC 230- 240V, 50 Hz Output: AC 5V, 150mA (power 0.75W) No-load power consumption: 0.21W Average operating efficiency: 53.5% Power supply manufacturer: HUA XU ELECTRONICS No.
Need help?
Do you have a question about the iMETEO X2 and is the answer not in the manual?
Questions and answers