Panasonic EH-NA0J Operating Instructions Manual page 8

►Set nozzle
For easy styling and blow drying of hair, attach the set nozzle
to the hair dryer.
• Set nozzle helps to direct the airflow onto a specific area of
the hair
►Quick-dry nozzle
You can increase the drying
rate by using the vertical
strong and weak airflows to
dry and loosen bundles of
damp hair.
• Attaching the set nozzle may
reduce performance of the
quick-dry nozzle.
►Air boost nozzle
A concentrated, fast airflow
reaches deeper to scalps
and effectively dry hair roots.
Recommended for thick hair
or drying hard hair roots.
• Attaching the set nozzle and air boost nozzle may reduce the
performances under the Hot/Cold Alternating mode or the
Hair Tip Care mode.
►Diffuser
For creating full-bodied hair with lots of volume and styling.
8
(Image)
Quick-dry
nozzle
Gentle Fast
airflow airflow
Air boost
nozzle
Fast airflow
Control indicator and mode explanation
When the power switch is turned on, the dryer will start at the
fast airflow setting / Hot Air mode.
• On all modes, an airflow enriched with nanoe™
MOISTURE+ and minerals will be provided.
Control Indicator
Airflow
Airflow switching
button
Airflow control
To change the airflow, press the airflow switching button.
Airflow
Mode control
To change the mode, press the mode switching button.
Mode
►Intelligent sensing
Two sensors monitor environment conditions and your way of
using the dryer, and automatically control the temperature to
prevent extreme heat.
(The air and room temperature are constantly monitored.)
Mode
Mode switching
button