Panasonic EH-NA0J Operating Instructions Manual page 11

3
3
When the hair is about 90 % dry, use the
Hot/Cold Alternating mode to fi nish it well,
making the hair shiny.
• Select [ ] with the mode
switching button.
In order to thoroughly apply hot and
cold air, part your hair to the left and
right to dry it.
1. Apply the Hot/Cold Alternating
mode while running your fingers
through your hair from the inside.
(One side)
2. Apply the Hot/Cold Alternating
mode while running your fingers
through your hair from the top of
your head to the tip of your hair.
(One side)
3. Also perform step 1 and 2 on the
opposite side.
If you are concerned about damaged ends, use
Hair Tip Care mode.
1. Select [Gentle] with the airflow
switching button and select [
with the mode switching button.
2. While using your
fingers to section your
hair, blow-dry the
inside and outside of
your hair to the ends.
3. Perform Step 2 to the
opposite side.
4
4
Turn the power switch off.
5
5
Remove the plug from the household outlet.
• When drying is complete, finish with a brush or your
fingers.
• After the hair dryer has cooled down sufficiently, keep it
in a place with low humidity.
]
11