Panasonic EH-NA0J Operating Instructions Manual page 16

Maintaining the nanoe
mineral outlet
At least once a month
In order to maintain the generation
amount of nanoe™ MOISTURE+
outlet and the mineral ion outlet.
1. Prepare a commercially available
new cotton swab (intended for
babies) and moisten the tip of the
cotton swab with water.
2. Pinch the tip of the cotton swab
with clean hands and make the tip
thin as shown in the figure to the
right.
3. Gently insert the swab in the
nanoe TM MOISTURE+ and mineral
outlet until it stops (about 1 cm).
4. Turn the cotton swab 2-3 times
carefully.
When turned, you may sense the
swab getting caught, but this is
not an issue.
16
MOISTURE+ and
TM
The tips of the
needle-shaped part.
Do not put a cotton
swab in any portion
other than the part
indicated by .
Maintaining the main body
Do this when dirty
To clean the hair dryer (when it is dirty), soak
a cloth in the soapy water and squeeze it out
firmly, then wipe with the cloth.
►Notes
• Do not use substances such as alcohol, nail
polish remover or detergent (hand soap).
Doing so may result in malfunction or part
cracks or discoloration.
• Do not leave the appliance with hairdressing
products or cosmetics on it.
Doing so will cause deterioration of the
plastic, leading to discoloration and cracks.
alcohol
polish
remover