Table of Contents
Advertisement
BT-H1350Y
(2) Video Input/Output Terminals (BNC)
These terminals have automatic termination.
When BNC connectors are connected into IN and OUT terminals, the 750
termination will be automatically opened.
(3 Audio Input/Output Terminals (RCA Phono)
(4) EXT.SYNC Terminal
This terminal also has automatic termination.
If a sync signal is input into this terminal, the monitor works to lock the selected
line to this external sync signal.
(5) Color Temp. Selector
6500K: Set the color Temp. switch to 6500K for broadcast use.
9300K: Set the color Temp. switch to 9300K to give the color temperature for non-
broadcast use.
(6) VCR Terminal (8 pin) VCR video/audio signal input
(7) Chromatic level Switch
This switch is for setting chromatic level to the connected signal, when the
component signal (YP«P«) is connected to the RGB / YPsPs terminals.
Position RGB: RGB signal only.
Position 100 : YP«P« for use with (M II) 100% color bar standard system.
Position 75
: YPsPs for use with 75% color bar standard system.
IN/OUT
Pin number
2
3
4
Pin number
Advertisement
Table of Contents
