Automatic Preset Tuning - Yamaha TX-492 Owner's Manual

Natural sound am/fm stereo tuner
Hide thumbs Also See for TX-492:
Table of Contents

Advertisement

AUTOMATIC PRESET TUNING

You can also make use of an automatic preset tuning function for FM stations only. By this function, this unit performs automatic
tuning and stores FM stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the
manual preset tuning method on page 10.
To store stations
1
FM/AM
2
MEMORY
MAN'L/AUTO FM
MEMO
Flashes.
The automatic preset tuning begins from the frequency
currently displayed. Received stations are programmed to
A1, A2 ... A8 sequentially.
* If more than 8 stations are received, they are also
programmed to the preset station numbers on other groups
(B, C, D and E) in that order.
NATURAL SOUND
AM/FM STEREO TUNER TX–492
POWER
Press and hold for
about 3 seconds.
AUTO
ST
MHz
PRESET STATIONS
1
2
3
4
5
6
7
8
A/B/C/D/E
MEMORY
EDIT
FM/AM
TUNING MODE
MAN'L/AUTO FM
AUTO/MAN'MONO
2 1
When the automatic preset tuning is finished
The display shows the frequency of the last preset station.
Check the contents and the number of preset stations by
following the procedure of the section "To recall a preset
station" on page 10.
To recall a preset station
Simply follow the procedure of the section "To recall a preset
station" on page 10.
A recalled station is shown by the frequency or station name on
the display.
Notes
You can replace a preset station by another FM or AM
station manually by simply following the procedure of the
section "To store stations" on page 10.
The automatic preset tuning search will be performed
through all frequencies until stations are stored up to E8. If
the number of received stations is not enough to be stored
up to E8, the search is finished automatically after searching
all frequencies.
With this function, only FM stations with sufficient signal
strength are stored automatically. If the station you want to
program is weak in signal strength, tune in to it with the
MANUAL TUNING method (in monaural) and program it by
following the procedure of the section "To store stations" on
page 10.
If no station is received by the automatic preset tuning
search, the search finishes after "NOTHING" flashes for
about 3 seconds on the display.
TUNING
DOWN
UP
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents