Hyundai HYU-558 Quick Start Manual page 20

6. After installing the installation plate, install the door station by inserting the rear
component into the hollow area of the installation plate.
While inserting the door station into the installation plate, incline the device by 5~10°,
as shown in the figure below.
7. Secure the door station by inserting the fixing screw according to the direction of the
arrow of the figure below.
Video Intercom Door Station·Quick Start Guide
Hollow Area
Figure 3-8 Install the Door Station (Type II)
Figure 3-9 Secure the Door Station (Type II)
Rear Component
KM3 Screw
13