Wall Mounting With Gang Box Of Type Ii Model - Hyundai HYU-558 Quick Start Manual

The dimension of gang box for type II door station is: 75 (width) × 75 (length) × 50
(depth) mm.
The dimensions above are theoretical. The actual size can be slightly different from
the theoretical dimension.

3.2.2 Wall Mounting with Gang Box of Type II Model

1. Take the gang box, installation plate and screws from the packing box.
2. Chisel a hole in the wall for inserting the gang box. The size of the hole should be 76
(width) × 76 (length) × 50 (depth) mm.
3. Insert the gang box into the hole, as shown in the figure below.
4. Attach the installation plate to the gang box and align the screw holes of the
installation plate with the screw holes of the gang box.
5. Insert 2 PA4 screws and a KA4 screw into the screw holes to fix the installation plate
onto the gang box. (The KA4 screw is optional.)
Video Intercom Door Station·Quick Start Guide
Figure 3-6 Insert the Gang Box (Type II)
Figure 3-7 Attach the Installation Plate (Type II)
PA4 Screws
KA4 Screw
12