TABLE OF CONTENTS READ THIS FIRST .................................. 3 INTRODUCTION ................................... 4 SAFETY PRECAUTIONS .............................. 5 SAFETY PRECAUTIONS AND WARNINGS FOR OWNERS OF HUR DEVICES ..........6 INSTALLATION ................................7 INTENDED USE ................................8 BASIC FUNCTIONALITY ............................10 Operation without RFID ........................... 10 5.1.1...
Page 3
ST9330-Hi5-MD Twist Easy Access ......................28 MAINTENANCE ................................. 29 Electrical safety test ............................30 Guidance and manufacturer’s declaration electromagnetic emissions and immunity ......31 HUR Cleaning wipes ............................32 HUR Disinfection wipes ........................... 33 TECHNICAL DATA ..............................34 Operation environment ............................ 34 Transportation environment ..........................
HUR products. We recommend that HUR authorized personnel carry out the installation, maintenance, and repairs actions. Your local HUR dealer is happy to help you if you need technical support or have HUR product-related questions. For other than normal, equipment-related use, it is recommended that the instructions below are followed: •...
INTRODUCTION In this User Manual You will find general instructions for use of HUR products. Information covers basic safety instructions, instructions for use of each machine, technical information of the machine and everyday routines as well as scheduled maintenance procedures.
If you feel unusual pain after the workout, seek medical advice from your doctor. The HUR equipment is intended for fitness center and rehabilitation use. The HUR equipment may be used only for their intended purpose. Incorrect use may lead to injuries, damage to the equipment, and cause the warranty and producer’s liability to become void.
Report the issue to HUR maintenance. • Defective equipment shall immediately be taken out of use after the discovery of the defect. The device must be marked in such a way that its use is clearly prohibited. Report the issue to HUR maintenance. •...
3. INSTALLATION It is recommended by HUR that the equipment is installed by an authorized HUR installation expert in order to ensure the reliability of the installation. A HUR installation expert has the appropriate tools and instructions needed for the installation process. In addition, an experienced installation expert is familiar with the details of each piece of equipment.
4. INTENDED USE STE5110-Hi5-MD Biceps/Triceps: Exercise machine intended for improving and maintaining muscle • strength of the arm. STE5120-Hi5-MD Push Up/Pull Down: Exercise machine intended for improving and maintaining • muscle strength of the upper body. STE5125-Hi5-MD Dip/Shrug: Exercise machine intended for improving and maintaining of the •...
Page 10
ST8820-Hi5-MD HUR Pulley (max. 20 kg) wall-mounted: Exercise machine intended for functional • training. ST8821-Hi5-MD HUR Pulley (max. 20 kg) free standing: Exercise machine intended for functional • training. ST8830-Hi5-MD HUR Pulley (max. 30 kg) wall-mounted: Exercise machine intended for functional •...
5. BASIC FUNCTIONALITY 5.1 Operation without RFID Press , and tap the exercise picture to view the exercise description. If the machine has other exercises, swipe to view other exercises. Activate the desired exercise by pressing Press to adjust the seat height and back support to maintain correct posture. Use the touchscreen to adjust seat, back support or lever arms.
The display shows the resistance level in kilograms [kg] or in pounds [lbs]. Some of the HUR Hi5 devices are dual function, i.e., one device can be used to exercise opposing muscle groups. The exercise selector switch button of the device is used to select which one of the movement directions is to be used.
5.5 Safety belt Some HUR equipment has a safety belt, which helps the user to stay in the device during exercising. Fasten the safety belt by pressing the belt buckles against each other until you hear a clicking sound. Tighten the belt by pulling the free end of the belt.
6. EQUIPMENT FUNCTIONALITY NOTE! The pictures of the machines in this section are directive. 6.1 STE5110-Hi5-MD Biceps / Triceps Biceps exercise: Place your arms under the rollers. Rest your chest and elbows on the support cushions, at the lever arm pivot ends. Exercise by alternately flexing your arms, lifting the lever arms upward.
6.3 STE5125-Hi5-MD Dip / Shrug Dip exercise: Push the lever arms down with straight wrists and your elbows in line with the lever arms. Maintain resistance on the return movement. This exercise primarily targets the triceps muscles and activates the chest. Shrug exercise: Lift the lever arms by bending your elbows and squeezing your shoulder blades together.
6.6 STE5160-Hi5-MD Pec Deck Pec Deck exercise: Place your forearms on the lever arms palms facing forward. Press the lever arms together, maintain resistance on the return movement. This exercise targets mainly the chest muscles. 6.7 STE5175-Hi5-MD Optimal Rhomb Optimal Rhomb exercise: Keep your chest attached to the chest support. Pull the lever arms together with your elbows in horizontal position, while squeezing the shoulder blades together.
Abdomen Right exercise: Place yourself sideways on the seat facing right. Work with your abdominal by pushing the lever arm downwards and maintain resistance on the return movement. Back exercise: Sit so that the lever arm is up against your shoulder blades and the back support supports your abdomen.
6.11 ST5340-Hi5-MD Twist Rehab Equipment adjustment: Adjust the back support to suit by loosening the screw on the back and lift or lower the support cushion to a suitable position. Tighten the screw back in place. Adjust the starting point by pulling the lever under the seat, simultaneously turning the foot supports to the desired position.
Abduction exercise: Exercise by pressing the levers apart with your legs. Lean your back against the seat. Return to the starting position slowly. 6.14 STE5530-Hi5-MD Leg Extension / Curl Equipment adjustment: Sit down in the seat so that the knees are resting on the upper cushion. Adjust the back support to desired distance.
Leg Press exercise: Exercise by pushing levers alternately forward with your legs, keeping your lower back firmly in the seat. Return to the starting position slowly. 6.16 STE5546-Hi5-MD Leg Press Incline Equipment adjustment: The machine has an adjustable foot support, enabling the use of various joint angles when exercising. Pull the red release handle outwards and simultaneously turn the foot support in the desired position.
6.18 ST8530-Hi5-MD Multifunction 5X Adjust the back support by lifting the handle on the back and moving the back support to desired position. Adjust the lower support cushions by pulling the handle so that the roller is ca. 10 cm above your heel. The machine has padded leg straps to secure thighs during exercising.
Leg Curl exercise: Place feet on top of lower rollers and fasten thigh straps and safety belt. Exercise by pressing levers alternately downward with your legs, return to the starting position slowly. 6.19 STE8540-Hi5-MD Multifunction 4X Dip exercise: Exercise by pushing the lever arms down with your hands, keep your wrists straight and lean against the back support.
Incorrect use may remove the manufacturer's responsibility and void the warranty. Incorrect use means all actions that are against the intended use of HUR products, and all actions against or failure to follow instructions in this User Manual.
To avoid injuries and damages, pay attention to following: • Do not pull the ropes too far to the side (max. 45°/90°), because the rope may get stuck between the rollers. • Support handles are intended to give support. They shall not be used for dipping, climbing, or carrying the machine.
6.22 ST9120-Hi5-MD Push Up / Pull Down Easy Access Equipment adjustment: 1. With wheelchair: Adjust yourself at the machine so that you are also leaning on the back support of the machine. 2. With EA chair: Set the chair so that you lean also against the back support of the machine. If you have an adjustable EA chair, adjust the seat to the desired height by lifting with both hands from the back of the seat.
Shrug exercise: Lift the lever arms by bending your elbows and squeezing your shoulder blades together. This exercise primarily targets the upper back and biceps. Alternatively keep the elbows straight and lift the shoulders. This exercise primarily targets the trapezius muscles. 6.24 ST9140-Hi5-MD Chest Press Easy Access Equipment adjustment: 1.
Adjust the chest support to up or down position by pulling it slightly towards you and turning the support cushion half a turn. Adjustment of the chest support enables a suitable exercise stance for all users regardless of size. WARNING! The chest support is not rigid. When entering or leaving the machine, do not lean on the chest support.
cushion half a turn. Adjustment of the chest support enables for people of different sizes to find the suitable exercise position. The machines have a release function, making it possible to move the handles closer to the user when beginning the exercise, making it easier to reach the handles. Press the button in the middle of the device to move the handles closer.
6.29 ST9330-Hi5-MD Twist Easy Access Equipment adjustment: For easier access to and from the device, lift the roller cushion and tilt it downwards. Turn the roller back up when you have seated yourself at the machine with feet on both sides of the roller. The roller locks into place by pushing it downwards.
Do not use dish detergent, as it will dry the artificial leather upholstery. Weekly Wipe the handle grips, It is recommended that you use HUR Cleaning upholstery products and disinfectants. Use only a small amount of water. Do not use products containing adjusting buttons.
Of course, your name and company information are required. NOTE! The HUR device can be identified by the serial number. The serial number can be found on the device frame in connection with the type plate. Some basic points regarding problem situations: •...
Medical electrical equipment needs special precautions regarding EMC and needs to be installed and put into service according to EMC information provided in this document. This declaration currently applies for HUR MD devices. Guidelines and Manufacturer’s declaration – Electromagnetic Emissions...
If the measured field strength in the location in which HUR MD device is used exceeds the applicable RF compliance level above, the device should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the HUR MD device.
NOTE! It is recommended that you use only HUR Cleaning wipes and HUR Disinfection wipes for cleaning and disinfecting the HUR equipment. Using a cleaning product or wipe that is not compatible with the surface material of the equipment can cause damage to the surfaces and padding of the equipment. If cleaning and disinfection has been done using a product other than the cleaning and disinfection products recommended by HUR, damage is excluded from warranty.
Need help?
Do you have a question about the SmartTouch Hi5-MD and is the answer not in the manual?
Questions and answers